1. Redux
  2. Support Guides

👨‍💻 System Overview

 

Build Redux

System Overview Guide

Thank you for purchasing your new Build Redux computer. This overview guide will familiarize you with all major components and their locations inside of your PC.

 

mceclip0.png

Build Redux order number sticker.

This sticker identifies the unique number for your PC. It is attached to your profile at Build Redux. Should you ever call our support technicians for service or support, giving this number to our personnel will allow them to quickly bring up information on your order. It’s an easy way to better assist you!

mceclip1.png

  1. Build Redux order number sticker.
  2. Your individual Build Redux order number. (When contacting Build Redux, reference this number.)
  3. The Build Redux order number sticker may be in one of several places as illustrated above.

 

mceclip2.png

  1. 8-pin CPU power cable.
  2. Mainboard.
  3. System memory. (RAM)
  4. CPU and heatsink/ water cooling pump. (Depending on config.)
  5. 24-pin Mainboard power cable.
  6. Video card.
  7. Video card PCI-E power cable.
  8. liquid cooling radiator (only applicable for liquid cooled systems.
  9. PCI-E slots. (Used for upgrades such as video capture cards, 10GB network cards etc.)
  10. 2 SSD slots. May contain SSD (depending on config.) (Location and slot amount may vary.)
  11. SATA cable/ cables for HDD/ SSD. (Location may vary but usually in this general area.)
  12. Wireless card (WIFI) (Card may be higher up on some systems.)

 

mceclip3.png

  1. Build Redux fan/ lighting control module.
  2. Motherboard CPU backplate.
  3. 25 storage bay 1. (May contain SSD or HDD (depending on config.)
  4. 25 storage bay 2. (May contain SSD or HDD (depending on config.)
  5. Power supply.

 

Top view of components

mceclip4.png

    1. Removeable magnetic dust filter.
    2. Chassis power button and top input/ output ports.

 

Top input/ output panel breakdown

mceclip5.png

  1. Storage activity light.
  2. USB 3.0 Type A port.
  3. USB 3.0 Type A port.
  4. Power button.
  5. Headphone port.
  6. Microphone port.
  7. Reset button.

 

Front and back

mceclip6.png

  1. Chassis power button and top input/ output ports.
  2. 3x 120mm RGB front fans.
  3. Build Redux front logo.
  4. Mainboard input/ output ports. (Port type, quantity and layout will vary based on config.)
  5. Rear 120mm RGB exhaust fan.
  6. Video card.
  7. Wireless card/ wireless antenna screws. (WIFI) (Card may be higher up on some systems.)
  8. Power supply / Power cable plug / Power supply ON OFF switch.

 

Bottom view of components

mceclip7.png

  1. Power supply intake / Power supply dust filter.

Articles in this section

See more